27/02/2017 Latest News: Rod & Steve Freeman's Charity Sky-Dive For Olivia & The Ronald McDonald House Charity

Concorde 12 Month Annual Motorhome Structural Inspection (Aufbau-Inspektion)

Click here for the Concorde Damp Test (Dichtehits Inspektion) check sheet - from 2006 Model Year .

For older Concorde motorhomes, up to and including 2005 Model Year vehicles, the following inspection is completeted.

The following items are checked

Check the fastening screws of the motorhome
Check if the outside lacquering and the under body protection are not damaged
Check the door of the motorhome, grease hinges and locks if necessary
Check the outside flaps, grease hinges and locks if necessary
Check the functioning of the combined heating/hot-water boiler system
Heating/hot-water boiler system: check the level in the equalizing vessel and of the antifreeze
Bleed the heating system
Check if the exhaust conduction for the heating system is conforming and fixed
Check the functioning of the refrigerator, if necessary clean the burner
Check the refrigerator system switches over from 12V mode to gas mode when the engine is switched off
Check the functioning of the gas oven and control its aeration
Check the functioning of water pump for fresh water
Check the water filter for fresh water system and clean it
Make a leak test on the fresh water and used water pipes, check the flow, check the water supply points
Make a leak and function test off the cocks
Make a leak and function test of the toilette
Check the charge level of the leisure battery/ies
Check the function of the control panel and protective circuit-breaker
Check the automatic charger and its function when batteries are connected in parallel
Check the function of the light system outside and inside
Check doors and flaps of the furniture, grease hinges and locks if necessary
Check the functioning of the fittings and locks of the windows and roller-blinds, grease if necessary
Check the roof windows (Hekis) and roof ventilators, grease the mechanics if necessary
Check the functioning of the electrical step, grease the bearing if necessary

See Also: Other Sections